Cart
Your shopping cart is empty!
It's never too late to make things right :)
0.00 грн.
Payment
Delivery
The nearest branch addresses can be viewed on the map.
from
150.00 грн.
Pickup (Kyiv)
For free
Description 759-920 WAGO-I/O-CHECK
WAGO-I/O-CHECK is an easy-to-use Windows application for operating and displaying a WAGO I/O System 750's node without connecting to a fieldbus system.
The software reads the configuration from the node and displays it graphically on the screen. This graphic can be printed together with a configuration list as documentation.
With WAGO-I/O-CHECK, it is possible to display and specify the process data of the I/O modules. The field wiring, including all sensors and actuators, can thus be checked before startup.
For some types of interface, Pt100 and thermocouple modules, application-specific settings can be made, such as the baud rate or sensor types.
The coupler must be connected to a free serial or USB port of the PC using the communication cable supplied in the set with the system to enable communication between WAGO‐I/O‐CHECK and the node.
Main attributes 759-920 WAGO-I/O-CHECK
Delivery
Delivery type
Installation file (CD-ROM)
Scope of delivery
CD-ROM with software (without communication cable)
System requirements
Graphics resolution
1024 x 786 (min.), 1280 x 1024 or higher (recommended)
Hard disk space
min. 150 MB
Memory
Min. 1 GB RAM 2 GB RAM or more (recommended)
Processor
1 GHz or higher, with 32 bits (x86) or 64 bits (x64)
Supported operating systems
Windows 7
Reviews about 759-920 WAGO-I/O-CHECK
0
There are no reviews for this product.
Questions and Answers (FAQ) 759-920 WAGO-I/O-CHECK
There are no questions about this product.
759-920 WAGO-I/O-CHECK
Article:759-920
Pre-Order
0.00 грн.
