Cart
Your shopping cart is empty!
It's never too late to make things right :)
Top
New
Article: 2587-2146
Brand: Wago
3447.00 грн.
Payment
Delivery
The nearest branch addresses can be viewed on the map.
from
150.00 грн.
Pickup (Kyiv)
For free
Description 2587-2146 Switched-mode power supply;Base;1-phase
Features:
- Optical status indication
- Suitable for both parallel and series operation
- Natural convection cooling when horizontally mounted
- Connection technology with push-in termination
- Electrically isolated output voltage (SELV) per EN 62368-1/UL 61010-1
Main attributes 2587-2146 Switched-mode power supply;Base;1-phase
Connection data
Connection technology
Push-in CAGE CLAMP®
Connection type 1
Input/output
Fine-stranded conductor
0.2 … 6 mm² / 24 … 10 AWG
Fine-stranded conductor; with insulated ferrule
0.25 … 2.5 mm²
Fine-stranded conductor; with uninsulated ferrule
0.25 … 2.5 mm²
Solid conductor
0.2 … 6 mm² / 24 … 10 AWG
Strip length
10 … 12 mm
WAGO connector
WAGO 2624 Series
Efficiency/power losses
Efficiency (typ.)
91 %
Power loss Pₗ
≤ 5 W (230 VAC; no load); ≤ 24.6 W (230 VAC; nominal load)
Environmental requirements
Ambient temperature (operation)
-30 … +70 °C (Device starts at −40 °C (type-tested))
Ambient temperature (storage)
-40 … +85 °C
Climatic category
3K3 (per EN 60721)
Derating
−4.8 W/°C (> +45 °C and < 200 V); −4.8 W/°C (> +50 °C and ≥ 200 V)
Operating altitude (max.)
5000 m
Relative humidity
5 … 96 % (no condensation permissible)
Input
Input current Iₗ
≤ 3.5 A
Input voltage range
1 x AC 90 … 264 V (Derating -1 %/V for voltage < 100 VAC)
Inrush current
≤ 15 A (at 230 VAC / 25 °C)
Mains failure hold-up time
≥ 22 ms (230 VAC)
Nominal input voltage Uᵢ ₙₒₘ
1 x AC 100 … 240 V
Nominal mains frequency range
50 / 60 Hz
Phases
1
Power factor correction (PFC)
Active
Material data
Weight
752 g
Mechanical data
Mounting type
DIN-35 rail
Output
Default setting
DC 24 V
Deviation
≤ 1 %
Nominal output current Iₒ ₙₒₘ
10 A (24 VDC)
Nominal output power
240 W
Nominal output voltage Uₒ ₙₒₘ
DC 24 V (SELV)
Output voltage range
DC 23.5 … 28 V (adjustable)
Overload behavior
Shutdown and automatic restart in the event of a short circuit
Residual ripple
≤ 100 mV (peak-to-peak)
Physical data
Depth from upper-edge of DIN-rail
117 mm
Height
125 mm
Width
52 mm
Safety and protection
Isolation voltage (pri.-PE, AC)
2,210 V
Isolation voltage (pri.-sec., AC)
3,510 V
MTBF
> 1,000,000 h (at 25 °C; per IEC 61709; SN 29500)
Open-circuit-proof
Yes
Overvoltage category
III (≤ 2000 m); II (> 2000 m)
Parallel operation
Yes
Pollution degree
2
Protection class
I
Protection type
IP20; per EN 60529
Series operation
Yes
Short-circuit-protected
Yes
Signaling and communication
Signaling
Optical status indication (DC OK)
Standards and specifications
Conformity marking
CE
Standards/specifications
UL 61010-2-201
Reviews about 2587-2146 Switched-mode power supply;Base;1-phase
0
There are no reviews for this product.
Questions and Answers (FAQ) 2587-2146 Switched-mode power supply;Base;1-phase
There are no questions about this product.
2587-2146 Switched-mode power supply;Base;1-phase
Article:2587-2146
3447.00 грн.
