788-304 Relay module;Nominal input voltage: 24 VDC;1 changeover contact;gray

Name: 788-304 Relay module;Nominal input voltage: 24 VDC;1 changeover contact;gray
Brand: Wago
Price: 359.16 UAH
Availability: InStock

Top

New

In stock

Article: 788-304

Brand: Wago

359.16 грн.

Found it cheaper?

Short description

...

Description 788-304 Relay module;Nominal input voltage: 24 VDC;1 changeover contact;gray

Main attributes 788-304 Relay module;Nominal input voltage: 24 VDC;1 changeover contact;gray

Basic relay

WAGO basic relay 788-154

Connection data

Connection technology Push-in CAGE CLAMP^®

Fine-stranded conductor 0.34 … 2.5 mm² / 22 … 14 AWG

Solid conductor 0.34 … 2.5 mm² / 22 … 14 AWG

Strip length 9 … 10 mm

Control circuit

Input voltage range ±10 %

Nominal input current at Uₙ 19 mA

Nominal input voltage Uₙ DC 24 V

Environmental requirements

Ambient temperature (operation at Uₙ>) -40 … +70 °C

Ambient temperature (storage) -40 … +70 °C

Ambient temperature UL (operation at Uₙ) -40 … +50 °C

Processing temperature -25 … +50 °C

Temperature range of connection cable ≥ (T_ambient + 20 K)

Load circuit

Bounce time (typ.) 6 ms

Contact material (relay) AgNi 90/10

Drop-out time (typ.) 6 ms

Electrical life (NO; resistive load; 23 °C) 30 x 10³ switching operations

Inrush current (resistive) max. (AC) 30 A / 4 s

Limiting continuous current 16 A

Mechanical life 30 x 10⁶ switching operations

Number of changeover/switchover contacts 1

Pull-in time (typ.) 8 ms

Recommended minimum load 12 V / 10 mA

Switching capacity AC-15: 6 A / AC 250 V; DC-13: 2 A / DC 24 V

Switching frequency with/without load (max.) 6 min^-1 / 1200 min^-1

Switching power (resistive) max. AC 4000 VA; DC (see load limit curve)

Switching Voltage, Max. AC 250 V

Material data

Color gray

Fire load 0.927 MJ

Weight 45.9 g

Mechanical data

Mounting type DIN-35 rail

Physical data

Depth from upper-edge of DIN-rail 54 mm

Height 86 mm

Width 15 mm

Safety and protection

Dielectric strength (control/load circuit) (AC, 1 min)Dielectric strength (control/load circuit) (AC, 1 min) 5 kVrms

Dielectric strength (open contact) (AC, 1 min) 1 kVrms

Pollution degree 3

Protection type IP20

Rated surge voltage 4 kV

Rated voltage 250 V

Safety information A separator plate (e.g., 209-191) must be used for voltages greater than 250 V between adjacent relay modules and for compliance with the reinforced insulation requirements.

Signaling

Status indicator Red LED

Standards and specifications

Standards/specifications UL 508 (max. 10 A)