Communication standards
IEEE 802.3z 1000BASE-SX/LX
Configuration options
SNMPv1/v2c/v3
Control Elements
14 x DIP switch: Alarm function power supplies and ports 1 … 10, 100/1000 Mbps fiber optic ports; 1 x Reset button: system restart
Diagnostics
Signal contact, Modbus/TCP, port status, port statistics, port load, traffic monitor, SFP information, syslog, mail alarm, SNMP traps
ESD (contact/air discharge)
8 KV / 15 KV
Indicators
Device: LED (PWR, RPS, POST) green: Power supply (primary), redundant power supply (secondary), POST function; LED (ALM) red: Alarm; LED (LASER ON) yellow, LED (LNK/ACT, 100) green, LED (OFFLINE) red: Status of fiber optic ports; per port: LED (100, LNK/A
Jumbo frame size
10000. Byte
MAC table (size)
16000 addresses
Number of 1 Gb/s ports SFP
2
Number of 100 Mbps ports
8
Optical fiber type
Single-Mode and Multi-Mode
Power consumption (max.)
12 W
Redundancy function
Redundant DC power supply; STP; RSTP; MSTP; Jet Ring < 300 ms; Xpress Ring < 20 ms; Dual Homing < 20 ms; Dual Ring; ERPSv2 < 50 ms; LCAP
Supply voltage
12 … 60 VDC; Cable length: < 3 m
Switching mode
Store-and-forward; non-blocking
Transmission medium (communication/fieldbus)
Copper cable: Cat. 5e or higher, 100 m maximum cable length; Fiber optic: SX Multi-Mode, LX Single-Mode
Transmission rate
Copper cable: 10/100 Mbit/s; Fiber optic:1000 Mbit/s
VLAN
Port-based and tag-based (4k VIDs)