Analog input resolution
16 Bit
Analog output resolution
12 Bit
Communications
Telecontrol protocols, requires an additional license
Configuration options
Web-Based Management
Control Elements
Operating mode switch (RUN, STOP, RESET); reset button
CPU
2 x Cortex A7; 650 MHz
Current consumption (field) max. (digital outputs, Uᵢₙ+)
2,000 mA
Current consumption (system) max.
500 mA
Data memory
128 MB
ETHERNET protocols
SSH
Indicators
LED (SYS, RUN, CAN), red/green: system status, CANopen; LED (USR) red/green: status programmable by user (can be used via CODESYS library); LED (µSD) orange: microSD status; LED (LNK/ACT) green: network connection via ports 1 … 2; LED (DI1 … 8) green: sta
Input characteristic
Type 3 (per EN 61131-2)
Internal memory (flash)
4096 MB
Isolation
1250 V (DC 1 min., between system and field level (digital outputs))
Load resistance (output voltage)
≥ 5 kΩ
Main memory (RAM)
512 MB
Memory card slot
Push-push mechanism
Non-volatile hardware memory
128 kbyte
Non-volatile software memory
128. kbyte
Number of analog inputs
2
Number of analog outputs
2
Number of digital inputs
8
Number of digital outputs
4
Number of measurement inputs
2
Operating system
Real-time Linux (with PREEMPT_RT patch)
Output current
short-circuit-protected
Output current (per channel)
500 mA (DC)
Program memory
32 MB
Programming environment
Node RED
Programming languages per IEC 61131-3
Structured Text (ST)
Signal type
Voltage
Signal type (voltage)
0 … 10 VDC
Supply voltage (field)
24 VDC (-15 … +20 %); via pluggable connector (picoMAX® 3.5; Push-in CAGE CLAMP® connection)
Supply voltage (system)
24 VDC (-15 … +20 %); via pluggable connector (picoMAX® 3.5; Push-in CAGE CLAMP® connection)
Temperature range
−60 … 350 °C, Pt1000, Ni1000
Transmission medium (communication/fieldbus)
Twisted pair S-UTP; 100 Ω; Cat. 5; 100 m maximum cable length
Transmission rate
10/100 Mbit/s
Type of memory card
microSD up to 32 GB (all guaranteed properties only valid with WAGO's memory card)
Visualization
Web-Visu